//! Source checks only for hardware boundaries that host execution cannot probe.
use std::{fs, path::PathBuf};
fn source(relative: &str) -> String {
    fs::read_to_string(PathBuf::from(env!("CARGO_MANIFEST_DIR")).join(relative)).unwrap()
}
#[test]
fn motor_pins_are_inhibited_before_initialization() {
    let module = source("src/f722/mod.rs");
    let interlock = module.find("motor_inhibit::inhibit(").unwrap();
    let validation = module.find("board::validate_board_config").unwrap();
    let initialize = module.find("board::initialize").unwrap();
    assert!(interlock < validation && validation < initialize);
    let interlock = source("src/f722/motor_inhibit.rs");
    assert!(
        interlock.find("rcc.ahb1enr().read()").unwrap() < interlock.find("port.bsrr()").unwrap()
    );
    assert!(interlock.find("port.bsrr()").unwrap() < interlock.find("port.moder()").unwrap());
}

#[test]
fn board_images_have_no_actuator_route() {
    let sources = [
        "src/lib.rs",
        "src/f722/mod.rs",
        "src/f722/board.rs",
        "src/f722/firmware.rs",
        "src/f722/interrupts.rs",
    ]
    .map(source)
    .join("\n");
    for forbidden in [
        "mod actuator",
        "MotorOutput",
        "MotorRoute",
        "TIM3",
        "TIM5",
        "Dshot",
        "Pwm",
    ] {
        assert!(!sources.contains(forbidden), "{forbidden}");
    }
    assert!(!source("Cargo.toml").contains("kaptan-actuator"));
}
#[test]
fn uart_runtime_has_no_dma_or_static_register_aliases() {
    for path in [
        "src/f722/serial.rs",
        "src/f722/peripherals/usart.rs",
        "src/f722/data_channel.rs",
    ] {
        let code = source(path);
        for forbidden in [
            "DMA1::ptr",
            "DMA2::ptr",
            "USART1::ptr",
            "USART2::ptr",
            "USART3::ptr",
            "UART4::ptr",
            "USART6::ptr",
            "DmaReadableBuffer",
            "MavlinkTransmitter",
            "dmat()",
        ] {
            assert!(!code.contains(forbidden), "{path}: {forbidden}");
        }
    }
    let firmware = source("src/f722/firmware.rs");
    assert!(!firmware.contains("DMA2_STREAM7"));
    assert!(!firmware.contains("DMA1_STREAM6"));
    assert_eq!(firmware.matches("imu_worker::spawn()").count(), 1);
    assert_eq!(firmware.matches("mavlink_worker::spawn()").count(), 1);
}
#[test]
fn source_keeps_atomic_chip_select_without_gpio_owner() {
    let routes = source("src/f722/routes.rs");
    let compact: String = routes.split_whitespace().collect();
    assert!(compact.contains("pub(crate)structMpu6000Spi1Route{spi:Spi1,}"));
    for bit in ["br2", "bs2", "br15", "bs15"] {
        assert!(routes.contains(&format!("write.{bit}().set_bit()")));
    }
}
#[test]
fn source_keeps_flash_irq_mask_and_reset() {
    let config = source("src/f722/config.rs");
    for required in [
        "link_section = \".data.kaptan_flash_operation\"",
        "\"mrs {primask}, PRIMASK\"",
        "\"cpsid i\"",
        "\"cpsie i\"",
        "fn reset_after_flash_timeout() -> !",
        "SYSRESETREQ",
        "core::arch::asm!(\"dsb sy\"",
    ] {
        assert!(config.contains(required), "{required}");
    }
    assert!(!config.contains("BusyTimeout"));
}
#[test]
fn normal_images_keep_usb_configuration_and_shared_file_service() {
    let manifest = source("Cargo.toml");
    assert!(!manifest.contains("development-config"));
    let board = source("src/f722/board.rs");
    assert_eq!(board.matches("FileService::new").count(), 1);
    assert!(board.contains("usb_mavlink("));
    assert!(board.contains("IngressId(id)"));
    assert!(board.contains("result.refresh_lease"));
    assert!(!board.contains("file_lease_ticks"));
}

#[test]
fn source_keeps_protocol_local_and_irq_priorities() {
    let firmware = source("src/f722/firmware.rs");
    let shared =
        &firmware[firmware.find("struct Shared").unwrap()..firmware.find("#[local]").unwrap()];
    assert!(!shared.contains("mavlink:"));
    for owner in ["uarts:", "usb:", "serial_clock:"] {
        assert!(shared.contains(owner));
    }
    assert!(firmware.contains("context.local.mavlink.process_worker_events"));
    assert!(!firmware.contains(".lock(|mavlink|"));
    assert!(firmware.contains("priority = 7, local = [mavlink]"));
    for vector in ["USART1", "USART2", "USART3", "UART4", "USART6"] {
        assert!(firmware.contains(&format!("binds = {vector}, priority = 14")));
    }
    assert!(firmware.contains("binds = OTG_FS, priority = 8, shared = [usb]"));
    assert!(firmware.contains("binds = TIM2, priority = 10"));
    assert!(firmware.contains("local = [timer], shared = [lidar]"));
    let timer_irq = &firmware
        [firmware.find("fn tim2(").unwrap()..firmware.find("async fn imu_worker").unwrap()];
    assert!(timer_irq.contains("if !context.local.timer.on_interrupt()"));
    assert!(timer_irq.find(".on_interrupt()").unwrap() < timer_irq.find(".lidar.lock").unwrap());
}