Files
kaptan/firmware/boards/geprc-f722-v2/src/board.rs
T

80 lines
2.3 KiB
Rust

//! Declarative support for the GEPRC TAKER F722 BLS 60A V2 stack.
use platform_stm32f7::{
F7Board, F722Hardware, F722ImmutableConfig as ImmutableConfig, Icm42688, ImuMount, LevelFilter,
Mavlink, Pa13ActiveHigh, Pb0Pb1Pb4Pb5Low, Pc3, VerticalSensor,
};
/// User-writable MAVLink endpoint policy.
#[derive(Clone, kaptan_config::Config)]
struct MavlinkConfig {
#[config(id = 101, key = "mavlink.system_id", unit = "id", range(min = 1))]
system_id: u8,
#[config(id = 102, key = "mavlink.component_id", unit = "id", range(min = 1))]
component_id: u8,
#[config(
enum,
id = 105,
key = "mavlink.logging.level_filter",
unit = "log_level"
)]
log_level_filter: LevelFilter,
}
/// User-writable telemetry publication policy.
#[derive(Clone, kaptan_config::Config)]
struct TelemetryConfig {
#[config(
id = 103,
key = "telemetry.imu_hz",
unit = "Hz",
range(min = 1, max = 100)
)]
imu_hz: u8,
#[config(
id = 104,
key = "telemetry.heartbeat_hz",
unit = "Hz",
range(min = 1, max = 10)
)]
heartbeat_hz: u8,
}
/// Complete user-writable configuration advertised by this board.
#[derive(Clone, kaptan_config::Config)]
pub struct UserConfig {
mavlink: MavlinkConfig,
telemetry: TelemetryConfig,
}
/// ICM-42688-P-based GEP-F722-HD V2 paired with the 60 A stack.
pub struct GeprcF722V2;
impl F7Board for GeprcF722V2 {
type UserConfig = UserConfig;
type ImmutableConfig = ImmutableConfig;
const FACTORY_USER_CONFIG: UserConfig = UserConfig {
mavlink: MavlinkConfig {
system_id: 1,
component_id: 1,
log_level_filter: LevelFilter::Info,
},
telemetry: TelemetryConfig {
imu_hz: 20,
heartbeat_hz: 2,
},
};
const IMMUTABLE_CONFIG: ImmutableConfig = ImmutableConfig {
name: "GEPRC TAKER F722 V2 (ICM-42688-P)",
service_hz: 100,
hardware: F722Hardware::new()
.output_inhibit(Pb0Pb1Pb4Pb5Low)
.imu(Icm42688::on_spi3().with_drdy(Pc3).mounted(ImuMount::Yaw180))
.mavlink(Mavlink::on_usart2().baud(115_200))
.vertical_sensor(VerticalSensor::none())
.status_led(Pa13ActiveHigh)
.telemetry_only(),
};
}