kaptan/firmware/platforms/stm32f7/tests/config_active_state.rs

#![allow(dead_code)]

use kaptan_config::{Config, ConfigManager, ConfigModel, ConfigStore, ConfigValue, FieldId};
use platform_stm32f7::{
    F7ImmutableConfig, F722Hardware, F722ImmutableConfig, ImuMount, LevelFilter, Mavlink, Mpu6000,
    Mpu6000Config, Pa4, Pb0Pb1Pb4Pb5Low, Pd2ActiveLow, VerticalSensor,
};

// Include the implementation as a child module so this platform-internal test
// can exercise the crate-private user-candidate adapter without flash hardware.
#[path = "../src/f722/config.rs"]
mod target_config;

use target_config::UserConfigModel;

#[derive(Clone, kaptan_config::Config)]
struct MavlinkConfig {
    #[config(id = 101, key = "mavlink.system_id", unit = "id", range(min = 1))]
    system_id: u8,
    #[config(id = 102, key = "mavlink.component_id", unit = "id", range(min = 1))]
    component_id: u8,
    #[config(
        enum,
        id = 105,
        key = "mavlink.logging.level_filter",
        unit = "log_level"
    )]
    log_level_filter: LevelFilter,
}

#[derive(Clone, kaptan_config::Config)]
struct TelemetryConfig {
    #[config(
        id = 103,
        key = "telemetry.raw_imu_hz",
        unit = "Hz",
        range(min = 1, max = 100)
    )]
    raw_imu_hz: u8,
    #[config(
        id = 104,
        key = "telemetry.heartbeat_hz",
        unit = "Hz",
        range(min = 1, max = 10)
    )]
    heartbeat_hz: u8,
}

#[derive(Clone, kaptan_config::Config)]
struct DriverConfig {
    #[config(
        id = 1000,
        key = "test_driver.gain",
        unit = "count",
        range(min = 1, max = 100)
    )]
    driver_gain: u8,
}

#[derive(Clone, kaptan_config::Config)]
struct TestUserConfig {
    mavlink: MavlinkConfig,
    telemetry: TelemetryConfig,
    driver: DriverConfig,
}

const IMMUTABLE: F722ImmutableConfig = F722ImmutableConfig {
    name: "active-candidate-test",
    service_hz: 100,
    hardware: F722Hardware::new()
        .output_inhibit(Pb0Pb1Pb4Pb5Low)
        .imu(
            Mpu6000::on_spi1()
                .with_drdy(Pa4)
                .mounted(ImuMount::BodyAligned)
                .configured(Mpu6000Config {
                    accelerometer: platform_stm32f7::AccelerometerRange::PlusMinus4G,
                    gyroscope: platform_stm32f7::GyroscopeRange::PlusMinus500DegreesPerSecond,
                    digital_low_pass_filter: platform_stm32f7::DigitalLowPassFilter::Bandwidth42Hz,
                    sample_rate_divider: 9,
                }),
        )
        .mavlink(Mavlink::on_usart1().baud(115_200))
        .vertical_sensor(VerticalSensor::none())
        .status_led(Pd2ActiveLow)
        .telemetry_only(),
};

struct OneRecord<C>(Option<C>);

impl<C: Clone> ConfigStore<C> for OneRecord<C> {
    type Error = ();

    fn load(&mut self) -> Result<Option<C>, Self::Error> {
        Ok(self.0.take())
    }

    fn persist(&mut self, candidate: &C) -> Result<(), Self::Error> {
        self.0 = Some(candidate.clone());
        Ok(())
    }
}

fn factory() -> TestUserConfig {
    TestUserConfig {
        mavlink: MavlinkConfig {
            system_id: 1,
            component_id: 1,
            log_level_filter: LevelFilter::Info,
        },
        telemetry: TelemetryConfig {
            raw_imu_hz: 20,
            heartbeat_hz: 2,
        },
        driver: DriverConfig { driver_gain: 7 },
    }
}

struct MalformedProjection {
    inner: TestUserConfig,
    system_id: Option<ConfigValue>,
}

impl Config for MalformedProjection {
    const FIELD_COUNT: usize = TestUserConfig::FIELD_COUNT;
    const SCHEMA_ID: [u8; 16] = TestUserConfig::SCHEMA_ID;

    fn descriptor(index: usize) -> Option<&'static kaptan_config::FieldDescriptor> {
        TestUserConfig::descriptor(index)
    }

    fn field_value(&self, id: FieldId) -> Option<ConfigValue> {
        if id == FieldId::new(101) {
            self.system_id
        } else {
            self.inner.field_value(id)
        }
    }

    fn set_field(
        &mut self,
        id: FieldId,
        value: ConfigValue,
    ) -> Result<(), kaptan_config::FieldWriteError> {
        self.inner.set_field(id, value)
    }

    fn validate(&self) -> Result<(), kaptan_config::ConfigViolation> {
        self.inner.validate()
    }
}

#[test]
fn mavlink_logging_policy_is_projected_and_validated_independently() {
    assert_eq!(
        core::mem::size_of::<target_config::F722UserRuntime>(),
        9,
        "runtime projection must retain narrow board-native scalar widths"
    );
    let mut candidate = UserConfigModel::<TestUserConfig, F722ImmutableConfig>::new(factory());
    candidate
        .set_field(FieldId::new(105), ConfigValue::U32(0))
        .unwrap();

    let active = candidate.validate(&IMMUTABLE).unwrap();
    let runtime = target_config::project_runtime(&active, &IMMUTABLE).unwrap();
    assert_eq!(runtime.mavlink_log_level_filter, LevelFilter::Off);
}

#[test]
fn runtime_projection_rejects_missing_wrong_kind_and_wide_semantic_values() {
    for (system_id, rule) in [
        (None, kaptan_config::ValidationRule::Inconsistent),
        (
            Some(ConfigValue::Bool(true)),
            kaptan_config::ValidationRule::Inconsistent,
        ),
        (
            Some(ConfigValue::U32(256)),
            kaptan_config::ValidationRule::AboveMaximum,
        ),
    ] {
        let malformed = MalformedProjection {
            inner: factory(),
            system_id,
        };
        let issue = target_config::project_runtime(&malformed, &IMMUTABLE).unwrap_err();
        assert_eq!(issue.primary(), Some(FieldId::new(101)));
        assert_eq!(issue.rule(), rule);
    }
}

#[test]
fn runtime_construction_reads_the_persisted_board_owned_user_root() {
    let factory = UserConfigModel::<TestUserConfig, F722ImmutableConfig>::new(factory());
    let mut persisted = factory.clone();
    persisted
        .set_field(FieldId::new(1000), ConfigValue::U32(42))
        .expect("driver field must accept a valid persisted value");

    let manager = ConfigManager::recover_compatible_or_factory(
        factory,
        IMMUTABLE,
        OneRecord(Some(persisted)),
    )
    .expect("synthetic persisted user configuration must recover");

    assert_eq!(
        manager.active().field_value(FieldId::new(1000)),
        Some(ConfigValue::U32(42)),
        "runtime construction must receive the validated persisted field"
    );
}

#[test]
fn committing_a_user_edit_does_not_mutate_the_boot_active_view() {
    let factory = UserConfigModel::<TestUserConfig, F722ImmutableConfig>::new(factory());
    let mut manager = ConfigManager::new(factory, IMMUTABLE, OneRecord(None)).unwrap();
    manager.begin().unwrap();
    manager
        .set(FieldId::new(1000), ConfigValue::U32(42))
        .unwrap();
    manager.commit().unwrap();

    assert_eq!(
        manager.active().field_value(FieldId::new(1000)),
        Some(ConfigValue::U32(7))
    );
    assert_eq!(
        manager.committed_value(FieldId::new(1000)),
        Some(ConfigValue::U32(42))
    );
}